PCE-CPC 100 Particle Counter | PCE Instruments by Muser
PCE Instruments PCE-CPC 100 Particle Counter
Features
- Real-time measurement from 0.3 μm to 10 μm
- Output in particles/28.3L or particles/m³
- Visual and audible alarm when threshold value is exceeded
- Modbus RTU and MQTT via RS485
- Real-time display of cleanroom class ISO 14644-1
- Robust housing for wall mounting
Description
The state-of-the-art particle counter enables precise real-time measurement in the range from 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling is performed by an internal pump. When the particles pass the light source (laser), light scattering occurs; the scattered light is converted into an electrical signal (pulse) by a photoelectric transducer, and the larger the particles, the larger the pulse signal.
The particle counter offers not only a visual but also an audible alarm function. Threshold values can be set for each channel; as soon as the predefined threshold values are exceeded, the cleanroom particle counter issues a warning. The integration of Modbus and MQTT ensures seamless integration into existing networks and enables efficient data communication. The sampling time can be set from 1 to 10 min and the pause time from 1 to 1000 min.
With our real-time display of the cleanroom class according to ISO 14644-1, the particle counter always provides control over the cleanliness of the environment. This function makes it possible to continuously monitor the cleanliness level and ensure that the premises meet the required standards.
The particle counter offers not only a visual but also an audible alarm function. Threshold values can be set for each channel; as soon as the predefined threshold values are exceeded, the cleanroom particle counter issues a warning. The integration of Modbus and MQTT ensures seamless integration into existing networks and enables efficient data communication. The sampling time can be set from 1 to 10 min and the pause time from 1 to 1000 min.
With our real-time display of the cleanroom class according to ISO 14644-1, the particle counter always provides control over the cleanliness of the environment. This function makes it possible to continuously monitor the cleanliness level and ensure that the premises meet the required standards.
Technical Specifications
| Particle | |
| Measuring range | 0 particles/28.3 l ... 1000000 particles/28.3 litres |
| Measurement channel sizes | 0.3, 0.5, 1.0, 5.0, 10 |
| Counting efficiency |
50 % @0.3 μm 100 % @≥0.5 μm (at 25±2 ℃, 50±10 % r.h.) |
| Flow rate | 28.3 l/min |
| Temperature | |
| Measuring range | -40 °C ... +125 °C |
| Resolution | 0.1 °C |
| Accuracy | ±0.2 °C (within 5 ... 60 °C) |
| Moisture relative | |
| Measurement range | 0 % ... 100 % |
| Resolution | 0.1 % |
| Accuracy | ±2 % v.Mw. |
| General technical data | |
| Display type | Touch display |
| Display size | 3.5 inch |
| Display refresh rate | 1 x per second |
| Interface | RS485, Ethernet |
| Sensor | Laser scattered light |
| Response time | 8 s |
| Menu language | English, Chinese |
| Protection class (device) | IP30 |
| Power supply | 24 VDC, 5 A |
| Plug type | Protective contact plug |
| Weight | 1495 g |
| Depth | 87 mm |
| Other dimensions | Tube: inner diameter: 10 mm / length: approx. 3 m |
| Operating conditions | 0 ... 45 °C , 0 ... 95 % r.H |
| Storage conditions | -20 ... 60 °C , 0 ... 95 % r.H |
Delivery Scope
- 1 x particle counter PCE-CPC 100
- 1 x isokinetic probe
- 1 x hose approx. 3 m
- 1 x mains cable
- 1 x power supply unit 24 V / 5 A
- 1 x operating instructions
