FMT-W30 Pull Tester | Alluris by Muser
Alluris FMT-W30 Pull Tester
Features
- Test of wire terminals according IEC, DIN, EN, BS, UL, SAE, MIL and NASA standards
- Space-saving and non-slip bench top instrument with hardened scratch-resistant base plate
- Always operable due to independant power supply, low cost of ownership
- Clamping device securely grips different surface materials
Description
The manual pull-tester is a rugged, hand-lever bench-top tool designed to determine the tensile strength of all solderless (crimped) cable connections. The measuring range of 500 N or 1000 N cover cable cross sections from 0.06 to 6.0 mm² (AWG 30 to 8).
The ergonomic construction with a heavy base plate made of surface-treated, nitrided steel is designed for non-slip use.
The test specimen holder there is a changeable adapter with 12 different slit widths from 0.5 to 6.0mm, which covers all common cable thicknesses. Other adapters are available as accessories.
Using the USB interface, the test data in MsEcxel can be easily managed and in just a few minutes, a complete test report with statistical evaluation can be created as a PDF file.
The ergonomic construction with a heavy base plate made of surface-treated, nitrided steel is designed for non-slip use.
The test specimen holder there is a changeable adapter with 12 different slit widths from 0.5 to 6.0mm, which covers all common cable thicknesses. Other adapters are available as accessories.
Using the USB interface, the test data in MsEcxel can be easily managed and in just a few minutes, a complete test report with statistical evaluation can be created as a PDF file.
Technical Specifications
Order No. | |||
FMT-W30C5 | FMT-W30K1 | ||
Capacity F(nom)* | N | 500 | 1000 |
Resolution** | N | 0.5 | 1 |
Tolerance** | % F(nom) | 0.5 | |
Temperature coefficient | %/ K | 0.02 | |
Reproducibility*** | %F | 0 | |
Repeatability* | %F | 0.3 | |
Hysteresis*** | %F | 0 | |
Max. operating force* | % F(nom) | 120 | |
Measurement error** | % F(nom) | 1 | |
Breaking force* | % F(nom) | 150 | |
Nominal deflection* | mm | 0.15 | 0.25 |
Display | Type | LCD, 5 digits, 14mm high | |
Measuring principle | Force sensor with full-bridge strain gauge and high-speed μ-processor | ||
Measuring rate | Hz (Peak) | ~ 1.000 | |
Memory | Statistics memory with display of the mean, maximum, minimum and standard deviation for 1000 measurements | ||
Cable diameter | mm (slot width) | 0.5 | 0.8 | 1.0 | 1.3 | 1.5 | 2.0 | 2.5 | 3.0 | 3.5 | 4.0 | 5.0 | 6.0 | |
mm (clamping device) | 0.1 – 6.0 | ||
Cross section | Range IEC 60352-2 | 0.05 - 4mm2 (AWG 10 - 30) | 0.05 - 6mm2 (AWG 8 - 30) |
Range SAE AS7928 II | AWG 14 - 30 | AWG 10 - 30 | |
Min. cable length | mm | 70 | |
Power supply | Type | Solar cell or via USB interface with connected PC | Optionally with USB power supply | |
Interface | USB 2.0 | Optional software FMT-W_Connect | |
Adm. temperature | Operation (°C) | 0 - 40 | |
Stocking (°C) | -5 - 60 | ||
Weight | kg | 14.0 | |
Dimension (LxWxH) | mm | 350 x 160 x 75 | |
Material | Anodised aluminum, surface hardened steel, stainless steel V2A |
*) according to VDI / VDE / DKD 2638 at 0.2 ... 1 x F (nom)
**) according to DIN 1319-1
***) due to design and application, no independent error contribution
Scope of Supply
Pull tester (desktop unit) complete with test adapter and clamp-off device, USB interface, CD-ROM with software (without license), data cable and USB power supply. Operating instructions (DE, EN, FR, SP, IT) with CE certificate of conformity. Please order DAkkS Calibration certificate, software license, removable adapter and carrying case separately.
Downloads
Product Video