Comark KM14 | Dishwasher Thermometer | -20ˇăC to 200ˇăC [Delivery: 3-5 days]
Comark KM14 | Dishwasher Thermometer | -20ˇăC to  200ˇăC [Delivery: 3-5 days] Pocket Digital Thermometers Comark Kuala Lumpur (KL), Malaysia, Selangor, Sunway Velocity Supplier, Suppliers, Supply, Supplies | Muser Apac Sdn Bhd
RM 149.00
SKU: 3851824
60 g
50 in stock

Comark KM14 | Dishwasher Thermometer

SKU: 3851824

The KM14 Dishwasher Thermometer incorporates a stainless steel penetration probe and can be placed inside a commercial dishwasher to check cycle temperatures are correct by using the maximum hold feature. A quick reading will show whether dishwasher operated at the correct temperature to sanitize equipment.
The KM14 Dishwasher Thermometer is multi-purpose and can also be used as a conventional food penetration probe thermometer. The KM14 Dishwasher Thermometer is a top performing digital thermometer that combines accuracy, speed of response and durability. Incorporates extended temperature range and max/min hold feature.
This Pocket Digital Thermometer combines accuracy with speed and durability. It was designed for use in commercial dishwashers*, so it is completely waterproof and has a ‘Max Hold’ feature that allows you to verify the highest temperature record during the dishwasher cycle.
  • Temperature Range: -20°C to +200°C / -4°F to +400°F
  • Stem Length: 127mm / 5″
  • Accurate to ±1°C / ±2°F
  • Waterproof and dishwasher safe
  • Field calibratable
  • Auto power off
  • Data hold button
  • BioCote Antimicrobial Protection
  • NSF Certified
* Domestic dishwashers have longer wash cycles than commercial dishwashers. As the KM14 Dishwasher Thermometer is designed to auto-shut off after 30 minutes it will not continue to record max/min temperatures after this period.
Field Calibration Procedures
The KM14 Dishwasher Thermometer can be calibrated at any time and the procedure is quick and simple:
  1. Put some water and crushed ice into a clean mug or water bath (approx 60% crushed ice to 40% water).
  2. Insert the thermometer into the ice solution until the stem is covered to at least half way along its length.
  3. Wait for the reading to settle.
  4. Press and hold the D-H button for 8 seconds to begin calibration.
  5. “CAL” will be displayed on the LCD screen and calibration at 0°C will be complete. 
Technical Specifications
Name Value
Temperature Measurement Range -20°C to +200°C / -4°F to +400°F
Accuracy ±1°C / 2°F
Resolution 0.1°C/F
Stem Length 127mm / 5''
Probe Tip Diameter 2.2mm
Sample Time 1.5 seconds
Environmental Protection BioCote Antimicrobial Protection
Certification NSF Listed
Battery Type 1.5 V Button Cell battery (Part no. AB13; LR44)
Waterproof Yes, to 3ft of water for 30 minutes
Warranty 1 Year Limited
Description Issue No
Technical Datasheet (KM14) 01
Measuring and Monitoring in the Food Industry 02
How-To Videos
Slush Ice Thermometer Calibration


Please leave your enquiry here, we will reply as soon as possible.

*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version