CTT-300 Torque Tester | Alluris by Muser
CTT-300 Torque Tester | Alluris by Muser Torque Tester Alluris Kuala Lumpur (KL), Malaysia, Selangor, Sunway Velocity Supplier, Suppliers, Supply, Supplies | Muser Apac Sdn Bhd
Alluris CTT-300 Torque Tester
 
 
Features
  • Automatic detection of two peak values >> for torque testing of caps with lock ring.
  • Limit value monitoring >> with pass /fail detection for both peak values.
  • Internal memory >> for the evaluation of test series.
  • Exchangeable centering base plate >> robust, stable and protected against dripping water (IP42).
 
 
Description
 
Digital Cap Torque Tester CTT-300 series with automatic detection of two peak values are designed for quick, manual torque testing of tamper evident closures. The cap is opened manually and the maximum torque for loosening the cap and for breaking the safety ring are detected separately. For both peaks limit values can be defined, which are monitored and displayed during the measurement.

The device has an internal memory with statistic function and an USB interface. Using the software FMI_Analyze torque curves can be visualized and limits are monitored via PC.

The housing complies with protection code IP42 and the torque sensor is protected against overload up to max. ± 20 Nm. With its compact design, the instrument is designed for desktop application. It may be screwed on table tops (maximum thickness 30 mm) to protect against slipping.
 
 
Technical Specifications
 

  Order No.
CTT-300B2 CTT-300B5 CTT-300C1
Measuring range M(n) 0-2 Nm 0-5 Nm 0-10 Nm
Resolution Res(n) 0.002 Nm 0.005 Nm 0.01 Nm
Accuracy @ 23 °C (F.S.) +/- 0.5 % (+/- 1 digit)
Tk [offset] Automatic taring (Auto-Tara)
Tk [relative (F.S.)] +/- 0.02 %/K
Measuring principle Bidirectional strain gauge with high-speed μ-Prozessor
Operation modes Standard Real time value
Peak Torque peak (drag indicator function)
Double Peak Two consecutive torque peak values ( drag indicator function )
Limit values 2 separately selectable limit values for both peaks (each with upper/lower limit)
Overload Max. admissible ± 20 Nm
Max. display range 120 % (max. Tara 20 % of M(n))
Display Type LCD, 5-digit, 29 mm high | Status-LED switching between red/green
Interfaces USB USB 2.0 data communication and power supply
Hirose Limits/switch signals, digital I/Os, trigger, power supply for external devices (requires optional cable)
Software FMI-Analyze Data analysis on PC
COM-Bridge Data transmission (e. g. to CAQ-Software)
Memory Single values Up to 1000 measuring values | Statistic function
Power supply Internal solar-cell with storage capacitor | via USB
Temperature range Operation 0…40 ˚C
Housing
 
 
Weight ca. 5000 g
LxWxH 280x170x95.3 mm
Fixation On tabletops up to 30 mm depth
(two holes with threaded bolts and lock nuts on the bottom)
Max. clamping range Ø 25 - 180 mm
Protection code (without cable) IP42 (Protection against dripping water up to 15° tilt devices)
 
 
Downloads

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version