Anton Paar TAG 4 | Tag Flash Point Tester
Anton Paar TAG 4 | Tag Flash Point Tester Flash Point Anton Paar Kuala Lumpur (KL), Malaysia, Selangor, Sunway Velocity Supplier, Suppliers, Supply, Supplies | Muser Apac Sdn Bhd
Anton Paar Tag Flash Point Tester: TAG 4
  • The automatic Tag closed-cup tester measures the flash point, the lowest temperature at which the vapors of a sample ignite upon the application of an ignition source. The tester can also be used to detect the ability of a sample to yield flammable vapors when maintained at an equilibrium temperature by the flash/no flash method. 
  • TAG 4 is suitable for flash point applications of jet fuels, solvents, chemicals, etc.
Key Features
Benefits at a Glance
  • Two cooling systems with Peltier elements are available: an economical air-cooled model and a low-temperature version with external water cooling
  • The two ignition systems in each unit give you the flexibility to work with an electric or gas igniter: if the gas ignition is used, the electric igniter will automatically relight the gas flame during the test, if necessary
  • The One-Twist swivel-around multi-function head guarantees the safe and easy one-hand connection of all sensors and actuators such as the shutter release, igniter and detector contacts
  • An extended measuring range up to 110 °C enables you to go beyond the conventional scope of the method
Convenient Operation
  • Test initiation by pre-installed standard test methods and ability to customize methods by user-defined programs
  • Outside flame sensors increase the system’s safety, especially for work with samples that have no conventional flash point but burn outside the test cup (e.g. due to flame-inhibiting components)
  • Splashproof touch-key panel with large LCD
  • A multi-detector combines the flash point detector and the temperature probe in a solid housing with a perfectly adjusted immersion depth
Customized User Flexibility
  • PC-software FPPNet (optional) for convenient remote handling and test data storage
  • Insulation hood (optional) to protect the cover and shutter assembly from icing during low-temperature flash point tests
  • Draft deflector (optional) recommended for gas ignition tests
  • Calibration set (optional)
  • Small-volume sample cup (optional)
Technical Specifications
Application range
(°C/°F selectable)
10 °C to 110 °C (air-cooled)
-30 °C to 110 °C (liquid-cooled)
Ignition Gas and electric (interchangeable)
Heating According to method or user-defined
Cooling of
Peltier elements
Air-cooled (by built-in fan)
Liquid-cooled (with tap water or circulation cooler)
Flash detection Thermocouple
Barometric pressure correction Automatic correction
Safety Overheat protection, automatic shut-off
Interfaces 2x RS232
Gas supply 50 mbar of propane or butane
Power supply 115 V/230 V, 50 Hz/60 Hz, 180 W (air-cooled)
230 V, 50 Hz/60 Hz or 115 V, 60 Hz, 150 W (liquid-cooled)
Dimensions 230 mm x 470 mm x 470 mm (W x D x H)
Weight 8 kg

Standard Methods
  • Tag flash point: ASTM D56, FTM 791-1101
  • Equilibrium flash point: ASTM D3941, ISO 1523, IP 492, EN 924
  • Equilibrium flash/no flash: ASTM D3934, ISO 1516, IP 491

Please leave your enquiry here, we will reply as soon as possible.

*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version