TGPLA Threaded Melt Bolt Thermocouple | Sterling Sensors by Muser
TGPLA Threaded Melt Bolt Thermocouple | Sterling Sensors by Muser General Thermocouple Thermocouple Sterling Sensors Kuala Lumpur (KL), Malaysia, Selangor, Sunway Velocity Supplier, Suppliers, Supply, Supplies | Muser Apac Sdn Bhd
Sterling Sensors TGPLA Threaded Melt Bolt Thermocouple

  • Melt bolt thermocouple sensor used for the temperature measurement of molten plastic.
  • A range of temperature sensors designed for high pressure applications in the plastics industry. Rated to 400°C they have a standard 1/2 inch UNF-20 thread, with the ‘bolt’ made from 316 stainless steel and in lengths of 76mm or 152mm.
  • The thermocouples are available in type J or K calibration and have a grounded junction with an option of either 5mm protruding or flush tips, complete with standard round pin connector termination.
  • Type K or J Thermocouple
  • 76mm or 152mm bolt Lengths
  • 5mm or flush sensing tip
  • 1/2 inch UNF-20 thread
  • Standard Thermocouple Plug
  • Plastic Extruders
  • Nozzles
  • Injection Moulding
Technical Specifications

Product Threaded Melt Bolt Thermocouple
Type Type K or J
Temp Range 0 to +400°C
Length 76 or 152mm
Thread 1/2 inch UNF-20
Tip Diameter 3mm
Material 316 Stainless Steel
Termination Standard Thermocouple Plug
Part Number TGPLA

Please leave your enquiry here, we will reply as soon as possible.

*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version