Comark PDQ400 | Waterproof Pocket Digital Thermometer | -20<C to 200<C [Delivery: 3-5 days]
Comark PDQ400 | Waterproof Pocket Digital Thermometer | -20<C to 200<C [Delivery: 3-5 days] Pocket Digital Thermometers Comark Kuala Lumpur (KL), Malaysia, Selangor, Sunway Velocity Supplier, Suppliers, Supply, Supplies | Muser Apac Sdn Bhd
RM 179.00
SKU: 3807774
100 g
8 in stock

Comark PDQ400 | Waterproof Pocket Digital Thermometer

SKU: 3807774

 
The PDQ400 Waterproof Pocket Digital Thermometer with Thin Tip Probe is compact and slim and has a thin probe tip for fast response. The 1.5mm probe is ideal when chefs check the temperature of thin foods like burgers. The PDQ400 Thermometer is waterproof so ideal for use in busy, steamy kitchens and can also be used to check commercial dishwasher cycles.
 
There is also a handy data hold feature on this Pocket Digital Thermometer which enables the user to temporarily hold the digital reading on the screen while they note a measurement.
 
The PQ400 Waterproof Pocket Digital Thermometer has a protective case for safe storage and transportation.
 
 
Features
  • Accuracy ±0.5ºC / ±1ºF
  • Waterproof
  • Thin tip probe
  • Response in under 6 seconds
  • Extended range -20º to +200ºC / -4º to +400ºF
  • Auto power off
  • Maximum temperature hold
  • Slim profile fits flat in pocket
  • Data hold to freeze a reading
  • Withstands constant use in wet or humid conditions
  • NSF
  • Field Calibratable
  • BioCote® anti-microbial protection
 
Field Calibration Procedures
 
Follow the instructions below to check the calibration of your PDQ400 Waterproof Pocket Digital Thermometer
  1. The thermometer is only calibratable in slush ice solution (60% crushed ice and 40% tap water) or a water bath.  Do not attempt to calibrate in any other manner.
  2. Immerse the stem of the thermometer to at least half length in the slush ice solution.
  3. Wait for the reading to become stable (usually ±1° of 0°C / ±2° of +32°F).
  4. Press and hold the CAL button for 8 seconds to begin calibration.
  5. CAL will be displayed for two seconds and calibrate at 0°C / +32°F is completed.
  6. Remove the thermometer from the ice water and continue to take measurements.
Note: CAL will be displayed any time the CAL key is pressed for 7 seconds, but the thermometer will not be re-calibrated unless the top is inserted in ice.
 
 
Technical Specifications
 
Name Value
Temperature Measurement Range -20°C to +200°C / -4°F to +400°F
Accuracy ±0.5°C / 1°F
Sampling Time 1.5 seconds
Response Under 6 seconds
Probe Tip Diameter 1.5mm
Waterproof Yes
Scales °C/°F
Battery Type 1.5 V Button Cell battery (LR44)
 
 
Documentation
 
Description Issue No
Technical Datasheet (PDQ400) 01
PDQ400 Packaging Slide Card 01
Measuring and Monitoring in the Food Industry 02
 
 
How-To Videos
 
Slush Ice Thermometer Calibration


 

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version