Anton Paar CLA 5 | Cleveland Flash & Fire Point Tester
Anton Paar CLA 5 | Cleveland Flash & Fire Point Tester Flash Point Anton Paar Kuala Lumpur (KL), Malaysia, Selangor, Sunway Velocity Supplier, Suppliers, Supply, Supplies | Muser Apac Sdn Bhd
Anton Paar Cleveland Flash & Fire Point Tester: CLA 5
 
  • The automatic Cleveland Open-Cup (COC) measures and describes the properties of a sample in response to heat and a test flame under controlled conditions. The flash point measures the tendency to form a flammable mixture with air while the fire point indicates the tendency of sustained burning. 
  • CLA 5 is suitable for flash and fire point applications of lubricants or bituminous material.
 
Key Features
 
Benefits at a Glance
  • Memory for 1000 tests, 20 operators, 100 sample names, 21 test methods
  • Statistical analysis (Min, Max, Mean, Repeatability)
  • Measures flash points of silicone samples without any problems
  • Automatically lights up the test flame, relights it by an electric igniter and suppresses the gas source at the end of the test
 
Convenient Operation
  • Test initiation by pre-installed standard test methods and ability to customize methods by 10 user-defined programs.
  • Alert messages for out-of-spec results
  • Pt100 sample temperature probe calibration either by dynamic calibration against certified ASTM thermometer or by correction table with 21 calibration points.
  • Calibration protocol printout
  • 5.7” color graphics display shows real-time measurement
  • Menu navigation by jog shuttle system with easy turn-and-push operation and color-coded LED indication for each operation mode
  • Data handling via USB stick for import into MS Excel® or to LIMS
 
Customized User Flexibility
  • PC-software FPPNet (optional) for convenient remote handling and test data storage
  • Automatic skin removal kit (optional)
  • Draft deflector (optional)
  • Stainless steel sample temperature probe Pt100 (optional)
 
Technical Specifications
 
Application range up to 400 °C (°C/°F selectable)
Ignition Gas
Heating According to methods, programmable and pre-heat mode
Detection of 
flash and fire point
Ionization detector
Sample temperature Pt100 glass probe
Barometric pressure correction Automatic correction
Safety Overheat protection, automatic shut-off
Interfaces 3x USB, 1x RS232, LAN
Gas supply 50 mbar of propane or butane
Power supply 115 V/230 V, 50 Hz/60 Hz, 600 W
Dimensions 230 mm x 390 mm x 460 mm (W x D x H)
Weight 12 kg
 
 
Standard Methods
  • ASTM D92
  • ISO 2592
  • JIS K 2265-4
  • AASHTO T48
  • FTM 791-1103
  • IP 36
  • GOST 4333
 
Downloads
 

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version